How to Keep a Carpet Runner from Moving on Carpet?

Laminated or hardwood flooring is used for an appearance of wealth and refinement in the majority of contemporary residences. Home Owners invest in carpets, rugs, and runners to furnish their homes. 

But, How to Keep a Carpet Runner from Moving on Carpet.

A beautiful carpet runner will complete the aesthetic of your room, but a runner that moves around is frustrating. In addition to keeping your hardwood floors quiet, these carpet runners protect them from damage.

Constantly rearranging the carpets or dealing with little slips can harm children, pets, or the elderly resulting in inconvenience.

Such carpet runners have the tendency to bunch, shift, and move on carpeted surfaces as they do on hard surfaces. This could also cause the carpet or area rug to shred and wrinkle, creating unsafe settings if you stroll through your hallway.

What Are The Methods To Keep a Carpet Runner from Moving on Carpet?

Here is a list of different methods you can use to ensure that your runner does not cause any trouble for you:

METHOD 1: Double Sided Tape for Carpets

The double-sided rug tape is the most effective method for stopping your carpet runner from sliding on the carpet. As the name implies, this double-sided carpet tape has a double-sided adhesiveness. Therefore, the carpet runner side will consequently attach to the carpet, while the rug side will adhere to the rug.

But, homeowners should be careful because peeling carpet tape with a rubber adhesive can damage carpets by tearing or pulling off carpet fibers.

METHOD 2: Non-slip Rug Grippers (AKA Rug Pads)

A non-slip high, quality carpet pad is an affordable and reliable solution. Rug grippers are simple to install; they operate like double-sided carpet tape and can be put to the corners of your carpet to keep them from buckling or curling.

On the other hand, these grippers are most effective on the low carpet pile. That’s why a rug pad is preferable for carpets with a lot of piles.

In addition to carpets, nonslip rug grippers can be utilized for a variety of flooring due to their flexibility, and the fact that these products use improved adhesive technology is another contributing factor. 

Rubber at the bottom and plastic at the top gives them traction on the carpet, and because they leave no residue, they are ideal for use on carpets.

METHOD 3: Velcro (Hook and Loop) Fasteners

The majority of individuals are unaware that rug runners can be fixed using Velcro. It is available in strips for use as a runner adhesive.

The Velcro removal procedure can cause carpet damage, making it a mediocre method as compared to the other alternatives.

METHOD 4: Carpet Pads

A carpet runner can also be kept in place using carpet pads that help to prevent slipping. These pads allow a degree of customization and regulation by altering the friction between the carpet and the rug.

The bottom of the runner contains friction, which assists in keeping them level, in place, and attached.

METHOD 5: Caulking Inexpensive Rugs

Another approach is to apply silicone caulk to avoid shifting or clumping the carpet runner. But, the method works best on inexpensive carpets and runners. Caulk can still do catastrophic damage to them. 

Thus, only use this method if all other methods have failed, and only on an old carpet so that you would be okay with it if it causes any damage and using silicone caulk needs less work. 

You can use it to treat the margins of your carpet to start. Also, you should caulk a few lines down the centre of your rug. Then, the caulk can be smoothed using any kitchen knife. Hence, walking on the carpet will not feel like walking on a rigid strip.

The caulk must dry for a minimum of 24 hours after application, and then the rug is placed on the carpet with the strips securely grasping the bottom.

But, there is a substantial disadvantage to caulking your rug as it is probable that you will have to pull out the carpet fibres to remove the rug, and this is especially true for carpets with a dense pile. As you remove your rugs or runners to clean them, you will need to scrape out the fibres as well.

METHOD 6: Using Furniture to Anchor The Rug

Using furniture is considered one of the easiest, most permanent, and most efficient solutions for stopping the rug from shifting.

When choosing how to secure a moving rug, it is essential not to compromise its aesthetic value. It should be given priority to maintaining the beauty and the existing furniture.

The edges and corners of your area rugs are ideal locations for upholstered chairs and oversized sofas. Alternatively, a substantial coffee table or ottoman could be employed to anchor the centre of the carpet. 

Utilize this to maintain the rug’s position and visibility. But, you should be aware that the side without attached furniture could still curl at the corners or move.

METHOD 7: Use a Carpet Lock

Carpet Lock offers focused safety between the rug and the floor for runner rugs, which are particularly susceptible to damage. Because of the 45oz of felt and natural rubber in each quart yard, you won’t need to worry about creases, bunching, or moving.

Its rug pad’s effectiveness derives mainly from the natural rubber rug gripper topping. The bottom layer is composed of natural felt and has a unique texture designed to grip the carpet fibres and hold the runner in place without damaging the carpet.

Being an environmentally friendly product, Carpet Lock is odourless. It is comfortable underfoot and has sufficient traction to keep runner rugs in place.

You may also read: How to Secure Area Rug on Top of Carpet?

FAQs (Frequently Asked Questions)

1). Does a carpet runner cause inconvenience?

Your room will look better with a beautiful carpet runner, but a runner that moves around needs to be fixed. These carpet runners not only keep your hardwood floors quiet, but they also protect them from damage.

Constantly moving the carpets or dealing with little slips can hurt children, pets, or the elderly, which is inconvenient.

2). How does a carpet pad keep the runner in place?

You can also keep a carpet runner in place with carpet pads that help keep it from moving. By changing how much friction there is between the carpet and the rug, these pads make it possible to make some adjustments and make the carpet fit better.

3). How does furniture help anchor the carpet runner?

Your upholstered chairs and big sofas will look great on the edges and corners of your area rugs. You could also use a large coffee table or ottoman as a focal point in the middle of the carpet.

4). Is Non-slip Rug Grippers an affordable option?

A good carpet pad that doesn’t slip is a cheap and reliable solution. Rug grippers are easy to put in place. They work like double-sided carpet tape and can be put on the corners of your carpet to keep them from buckling or curling.


How to Keep a Carpet Runner from Moving on Carpet is not a difficult task, 

It would be best if you gave substantial priority to avoiding trips and falls by fastening a carpet runner in place. If the carpet runner’s fibres are soft and long, they will likely shift more than others. You’ll save effort and time because you won’t need to reposition the runner regularly.


Leave a Comment